Blog Tools
Edit your Blog
Build a Blog
View Profile
« October 2012 »
S M T W T F S
1 2 3 4 5 6
7 8 9 10 11 12 13
14 15 16 17 18 19 20
21 22 23 24 25 26 27
28 29 30 31
Entries by Topic
All topics  «
Bypassing
Featured!
General Chatter
Lock picking
Locksmith Jobs
Reviews
Useful references
You are not logged in. Log in
Locksmith Blog | Locksmiths Blog | Blog
Saturday, 27 October 2012
Lock opening vids - Locksmith Blog
Topic: Lock picking

Was browsing through my photobucket account this morning and stumbled on a few interesting lock opening vids i made but probably never posted for whatever reason.

Cyberlock magnetic bump attack

This is the magnetic attack used to bump open the older generation of videx cyberlock.

Millenco Magnum Wafer Overlift

Method i discovered to quickly defeat the Millenco Magnums wafers.

 Era BS Thumbturn Bypass

Simple bypass of the new BS ERA thumbturns that can cause so much trouble when drilling.

Lever lock bumping

Local locksmith demonstrating the bumping of worn lever locks


Posted by Rick the Pick at 9:44 AM BST
Updated: Sunday, 11 November 2012 5:06 PM GMT
Post Comment | Permalink | Share This Post
Wednesday, 19 September 2012
Carbide tipped drill bits - Locksmith Blog
Topic: Reviews

With lock manufacturers being pressured into producing even more impenetrable locks our lives as locksmiths are getting trickier by the day.

Im not a big fan of pushing high security locks onto the domestic customers;

for one: It makes my life as a locksmith much more stressful in the event of a lockout.

two: Burglars rarely attmept to open a lock anyway.

So the last few months iv come across quite a few nasty locks that have felt the wrath of the rotary pick... and then laughed at me while they resisted to the last slither of metal holding them strong.

As most locksmiths will know; drilling a lock can go terribly wrong!
(Thats deffo not one of mine btw! HaHa)























Throw in torrential rain or a poorly lit alleyway and you are guarantee'd a headache.

So lets get to the point.

Good hardplate carbide tipped drills are relatively expensive!
Faced witha good BS rated cylinder and a spot of bad luck could see you using 3 bits when drilling at the traditional sheer line point.

Iv been testing a few different brands of carbide drill to see how they fare in the locksmiths world.

All drills have been tested on locks containing two or more hardened anti-drill pins plus one or more stainless key pins.

SKS budget drill:


These are priced in at £2-3 plus VAT for a useable size.

Poor penetration against hardened pins

Struggle against stainless key pins.



Budget Duffells drill:

Priced between £1.30 and £2.20 plus VAT for a useable size.

Reasonble penetration against hardened and stainless pins.

Cutting edge continues down the drill bit for widening holes

 

Souber Tungsten Carbide bits:

More expensive range at £3-4 plus vat for a useable size.

Reasonable penetration against hardened and stainless pins.

Last slightly longer that the other budget ranges.



Alpen Reds

Much stronger than other budget ranges with the same strength as the Souber bits.

Price is very reasonable and these are now stocked by all the major trade suppliers.

_____________________

We were recently featured in the locksmith directory featured locksmiths page: Wolverhampton Locksmiths


Posted by Rick the Pick at 8:11 AM BST
Updated: Monday, 9 November 2015 3:28 PM GMT
Post Comment | Permalink | Share This Post
Thursday, 12 July 2012
Support Local locksmiths - Locksmith Blog

This is the new weapon against the national advertisers.

This directory is about promoting local locksmiths and the logo represents their membership of the No nationals campaign.

In these hard economic times it is important to support small local businesses, in our case locksmiths.

As soon as customers realise that national companies are all about extortionate charges and shoddy workmanship performed by fresh trainees the better.

to share this logo on your website you can paste the following code:

<a href="http://www.locksmith-directory.org.uk/about.html"><img src="http://www.locksmith-directory.org.uk/images/local-locksmith.png" alt="local locksmiths"></a>

If you see any national company displaying the logo on any of their pages then please report to placeborick@hotmail.com with details.

Thanks

Rick | Locksmith in Wolverhampton


Posted by Rick the Pick at 1:28 PM BST
Updated: Monday, 9 November 2015 3:29 PM GMT
Post Comment | Permalink | Share This Post
Thursday, 21 June 2012
bad customers - Locksmith Blog
Mood:  don't ask
Topic: Locksmith Jobs

Being a self employed locksmith can be quite frustrating at times.

This week seems to have ticked all the boxes, being messed about left right and center on most of my locksmith jobs. Its definately been one of those 'Why do I bother' weeks.

First lesson i'v learned is:

Never do anyone a favour!

Your act of charity or heping out that 'friend' is rarely appreciated. Regardless of the greatly reduced fee (if you have made anything at all) they WILL moan about it come paying time. Needless to say i'v been clear that next time; "dont be calling me!"

Second lesson:

Dont expect any thanks for the work you do...

I recently had a hospital book me to arrive at a patients house on their return as the paramedics had just shut the door whilst rushing her off to hospital.

The family of the patient all had keys however none of them could be contacted or had bothered to visit the elderly woman (In 5 weeks i might add) thus a locksmith had been arranged.

So the ambulance pulls up and i begin unlocking the door whilst they unload the elderly woman.


locksmith picking a lock

Literally as the last pin was binding a car screaches alongside the road and a big burly woman screams "Stop, I have the keys!"

Ignoring me completely the woman barges through everyone there and her first words, i kid you not... "Why didn't you tell us you were in fucking hospital..."

Since i was ignored completely whilst they shouted at one another I packed my bag and left. This was clearly not anyone i was going to see a penny out of...

Although not every working week as a locksmith is this miserable, it has dented both my pride and enthusiasm and I'l definately be glad to see the back of this one.

Chin up and Happy locksmithing! :-)

Rick | Walsall Locksmith


Posted by Rick the Pick at 2:56 PM BST
Updated: Monday, 9 November 2015 3:30 PM GMT
Post Comment | Permalink | Share This Post
Wednesday, 30 May 2012
Staffs Police - locksmith Blog
Topic: Locksmith Jobs

I havent blogged for quite some time now as work has picked up and it seems im the only locksmith in the area that hasn't gone under.

I can't complain....

So,

Just blogging, well more ranting regarding a certain non paying customer.

I feel it is my duty to publicly name and shame, even if it saves just one self employed tradesman from getting shafted by these unlikely CROOKS!

I completed a locksmith job for Staffs police, over eight weeks ago.

The PC i dealt with (5093 T.Reece) promised me this and that regarding payment for the job and seemed a genuine chap.

So the weeks passed by and I heard nothing from Staffs police and sent out the usual reminders and made a few calls.

Well two months on and iv currently been in touch with six different members of Staffs Police, sent 6 reminders all with payment details, sent a letter of legal action to both the officer i dealt with and the accounts dept.

Still no attempt whatsoever to make a payment, nobody calls back and the original PC full of promises seems to have vanished.

Its customers like this that self employed tradesmen DO NOT NEED.
Times are hard as it is, and frankly I think Staffs Police are a complete bunch of criminals.

I strongly recommend you think carefully before dealing with these pirates.
Staffs Police, come pay time will lead you on a wild goose chase and pass you from pillar to post to avoid paying up.

I will be pursuing this one as far as possible as I think crooks like this need exposing.

For anyone else that has been shafted by Staffs police, here are a few contacts I did manage to scrape together but dont hold your breath!



MARCIA ASHER - Senior Finance Asst

DEE ECCLESTON Responsible for setting up accounts

...and should the money arrive in my account I will let you all know.

Happy Locksmithing

________________

UPDATE: Money finally arrived after ten weeks hassling them and an apology from the gaffer... Case closed Locksmith Cannock

Posted by Rick the Pick at 10:59 AM BST
Updated: Monday, 9 November 2015 3:31 PM GMT
Post Comment | Permalink | Share This Post
Tuesday, 5 July 2011
Stale Summer / Locksmith Training - Locksmith Blog
Topic: General Chatter

Its that stale summer period again and theres not much happening in the way of work, news or anything really and therefore nothing much to report.

I do have a few good items to post later on when i have a bit more time to write them up properly though:

-Femurats manifoil safe lock manipulation guide/experience: An interesting insight into a newbies first NDE safe cracking.

-Thumbturn wires: How to make your own thumbturn wire and how to use it properly

-Locksmith handy tips and tricks: useful nuggets of knowledge to make life easier.

Keep stopping by and keep me posted on any new developments in the locksmith world!

----

lock picking course learn to be a locksmith


Posted by Rick the Pick at 7:24 PM BST
Updated: Sunday, 2 December 2012 8:54 AM GMT
Post Comment | View Comments (1) | Permalink | Share This Post
Friday, 17 June 2011
Spamming my Blog

Just a word of warning for SEO folk spamming my blog:

Firstly; dont waste your time, I will delete it unless otherwise agreed beforehand via email.

Secondly; I forward all the offending URL's in a monthly report direct to google who will penalize your site accordingly.


You have been warned!


 


Posted by Rick the Pick at 11:28 PM BST
Updated: Monday, 9 November 2015 3:31 PM GMT
Post Comment | Permalink | Share This Post
Monday, 6 June 2011
uPVC mech replacement parts - Locksmith Blog
Topic: General Chatter

A few days ago i was called out to a failed upvc mech.

Upon removing the handle i saw it was a Millenco with the dual spindle cams however only used the upper cam.

upvc door lock

The door was unlocked easilly using the second cam below and i soon had the MPL on the floor.

The lock was in great condition, however the cheap cast cam had snapped off when the customers grandaughter had been swinging on the handles.

I agreed with the customer that it wasnt neccessary to pay the massive cost of a replacement unit and i would swap the top and bottom spindle cams to repair the lock.

It took a few minutes and we had one working mech again, at the fraction of the cost of replacing the unit, not to mention the time saved fetching another one.

millenco door lock

Which leads me to ask the question;

Why dont manufacturers sell replacement parts for these locks?
(If they do i havent seen any yet!)

**Edit: Someone got the hint: http://midlandlocks.angelfire.com/blog/index.blog/1475337/millenco-replacement-cams-locksmith-blog/

Maybe its better for business to be selling whole units....

The cost of repairing a failed upvc lock mechanism is pretty high with certain models, Millenco especially as they have non-replacable gearboxes.

I often find myself appologising to my customers for the cost of repairing their door when in reality it is the lock manufacturers pocketing the lions share of the money.

Is it time we started demanding replacement parts for these locks in order to keep costs down? Afterall there is a considerable difference between the £50+ MPL's and a couple of quids worth of cast metal.

upvc lock cam

Next time you are ordering a part from your supplier; Ask for the part to fix the existing lock. Its a long shot but one day they may respond to the demand by offering these parts for sale.

In the meantime i will be stripping and sorting my old mech parts for future use.


Posted by Rick the Pick at 8:53 AM BST
Updated: Wednesday, 20 April 2016 8:05 AM BST
Post Comment | View Comments (1) | Permalink | Share This Post
Friday, 15 April 2011
Unlocking a deadlocking snib with no letterbox
Topic: Locksmith Jobs

A few days ago i encountered my first deadlocked nightlatch where the snib had managed to activate as the door was slammed shut, and of course this door had no letterbox.

Another good locksmith showed me a method to unlock these a few years back however iv never hasd the opportunity to test it out.

The basic principle is to remove the cylinder from the door, then drill a hole in the back of the nightlatch to manipulate the back of the snib button.

So heres how i got on:

To remove the cylinder you need to break the two retaining screws on the rim cylinder. Luckily for me it was only a cheap one and not a solid brass one which would have been far messier.

The best method (if you dont have a fancy rim snapper bar) is to drill top right and left of the cylinder face, angles slightly downwards on the face of the cylinder. This will prevent you drillin the actual securing screws and hit directly on the bit of brass holding it in.
 rim cylinder lock removal

Once you have fractured both retaining areas you may need to get a good screwdriver in there just to wiggle thecylinder until the screws free off, it should then drop straight out.

You are then left with the 32mm hole and the cylinder back plate.

If you can identify the type of nightlatch now it would be useful to locate the position of the snib, however the usual location is to the bolt side of the lock (frame side).

Yale nighlatch opening

Drill yourself a decent sized hole approx 10mm on the edge of the 32mm hole angled slighlty towards the frame side of the door.
This is absolutely bang on target for the Yale nightlatch i was working with and probably the majority of the nightlatches you will encounter.

Once the backplate has peen penetrated try not to go in any further and damage the lock. Using a poke wire locate the snib and deactivate. Open with flat blade screwdriver.



Posted by Rick the Pick at 8:38 AM BST
Updated: Monday, 2 May 2016 4:20 PM BST
Post Comment | Permalink | Share This Post
Wednesday, 30 March 2011
Dealing with nutters? O_o Locksmith Blog
Topic: Locksmith Jobs
Every once in a while i get called out to a job that i cannot wait to get away from.

Today for example, i turned up to do a free home security survey. The door opened and i was greeted by a fairly normal looking woman in her thirties.

As i was about to walk in the door i noticed the postcards stuck in the window relating to various conspiracy theories and government cover ups.

I was half way through the door and i realised it was now too late to turn back...

Basically one of those customers that was completely stark raving mad, the house was in an odd state and i tried my best to get away as quickly and politely as possible without offending.

The customer was very paranoid about security and had alarms, locks and hasps on everything, even the loft hatch, and locked the door behind me on the way in *GULP*

These are never nice situations to be in and luckily i escaped unscathed on the promise of providing her with some high security locks for her door.

Literally anything could happen on a job like this; getting attacked, getting accused of attacking, etc. These kinds of people are usually easilly offended, angered or upset and should be dealt with utmost caution!

So my question is, how would you deal, or have you dealt with a similar situation?

Its not my first and im sure it wont be the last...

____________________

Our friends at Pennine Security Solutions - Locksmiths in Sheffield have a new website, please check it out :-)

Posted by Rick the Pick at 5:14 PM BST
Updated: Thursday, 6 December 2012 5:32 AM GMT
Post Comment | Permalink | Share This Post
Sunday, 27 March 2011
Locksmith snapper bars, and custom tools
Topic: General Chatter

Im currently suffering the slipped disk of hell in my lower back to bring you this update, sitting on this chair is murder so i hope you appreciate my sacrifice :-D

locksmith tools

Unfortunately, this weekend saw the death of one of my favourite locksmith tools, the snapper bar. It was only a budget SKS job but its seen me through hundreds of jobs before finally cracking up, leaving me right in the shite on an important job, Anyone thats had to open a thumbturn euro with a rounded off end will undertsand how difficult it is to hammer the plug round whilst engaging the cam in the lock... Not my finest moment but another experience point earned.

lock snapper bar

Anyway, i replaced the old tool with a new (i think its a pink's) budget snapper bar that has removable ends that screw into the main bar. An interesting design, however i fear the weak point may be the bar itself. I can see the tubing splitting further down the line around the threading...only time will tell.

Its been one of those quiet weeks thats seen me pottering around my shed making things and counting stock. One of my experiments was to make one of those key turners for curtained deadlocks.

locksmith key turning tool

Using only the junk i could lay my hands on and a tad of dremmel work i came up with this design; i think you will agree the handle is pretty cool salvaged from a battered old combo padlock from the pound shop.

Also managed to get a bit of lock picking practice in again. I really have lost my mojo as of late, thus the heavy usage of my snapper bar.
Best pick of the week was probably this garrison padlock picked with a half diamond southord pick, although brand new out the box wasnt going to be too awkward.

garrison padlocks


Posted by Rick the Pick at 7:33 AM BST
Post Comment | View Comments (1) | Permalink | Share This Post
Wednesday, 2 March 2011
uPVC Door Locks - Common Problems
Topic: General Chatter

I wrote this article for the benefit of locksmiths who would like to add a little useful content to their websites.

Please dont copy and paste!

I would appreciate a link to this page in return for the use of the information.

 Common upvc door lock problems

 Door not locking properly / Stiff handle...

There are several reasons why your upvc door could be failing to lock correctly:
If the handle has been feeling a bit stiff and the key wont fully turn anymore, chances are that your upvc door is out of alignment. This can be caused by swelling and contracting of the upvc door at differing temperatures or from general wear and tear on the upvc door due to repeated slamming or hanging on the door itself. This can be sorted by adjusting the hinges of the door to re-align the keeps in the frame. once the lock is operating smoothly without obstructions the key will turn.
You can get similar symptoms due to debris in the upvc door frame preventing the door from shutting true. Regular cleaning of dirt and stones out of the frame will prevent this.

Door will only lock from one side...

If you find that your upvc door only seems to lock from one side of the door and the other will not allow a full turn of the key, then you will need a replacement lock barrel. This is caused by the central cam of the lock cylinder slipping out of alignment. General causes seem to be due to worn keys and lock components often as a result of heavy use and substandard quality locks,
You will need to call your local locksmith to replace the cylinder with a new one of correct size.

This  is a relatively quick job if there are no other complications.


Handle is spinning all the way round, not opening the door...

This is often the aftermath of not getting your upvc door adjusted when it has been feeling stiff.

Prolonged forcing of the handle puts massive strain on internal parts and eventually they WILL break!
You have broken the spindle inside the lock back box and will need either a replacement backbox or entire locking unit, depending on the type of multipoint lock fitted.
You will need to call a local locksmith to open the upvc door and order the new parts which can be pricey therefore it is important that you get your door adjusted when early symptoms of stiffness occur.

Lost Keys / Locked out...

This is definitely a job for an emergency locksmith,

DO NOT attempt to force the upvc door open as you may cause more serious damage to the multi-point lock. An experienced locksmith should be able to pick or drill the lock to open the door cleanly without permanent damage. Once the upvc door is open the lock cylinder can be removed and a new one fitted,

Lock Cylinders

Often, the cylinders fitted in new upvc doors are not the best quality and may not be suitable to satisfy your insurance requirements. Exterior door locks need to conform to BS3621 and should display a stamped kitemark on the lock. A good example is the new Yale antisnap lock.

These upvc locks will be more expensive than bog standard ones, however provide considerably more protection against drilling, snapping and picking or bumping the lock.

There are many brands of lock that exceed the British Standard rating and offer incredible protection against unauthorised opening. These demand a high price but would be well worth investing in for protecting high risk premises.

The lock cylinder should not protrude more than 5mm from the handle of the door, ideally they should sit flush.

Locks that stick out from the face of the door more than 5mm are a considerable security flaw and you should contact a locksmith to arrange the fitting of a correct sized lock.

Posted by Rick the Pick at 1:03 PM GMT
Updated: Sunday, 20 January 2013 10:19 AM GMT
Post Comment | View Comments (1) | Permalink | Share This Post
Monday, 21 February 2011
Videx attack - Locksmith Blog
Topic: Bypassing
I have decided not to post the details of this particular attack for now, but can now confirm that the Videx Cyberlocks are definately vunerable to a certain bypass method that is mentioned in various dark corners of the web.

cyberlock opened

Posted by Rick the Pick at 8:50 AM GMT
Updated: Saturday, 2 April 2011 4:58 AM BST
Post Comment | Permalink | Share This Post
Thursday, 17 February 2011
Back to basics Locksmithing - Locksmith Blog
Topic: Locksmith Jobs
Had to open up an antique chest today and make a key for the lock. Very simple warded lock open in about 30 seconds with a well shaped wire.

I love this kind of work, back to basics, locksmithing at its best, working on a handmade lock that some long dead craftsman probably knocked up in his garden workshop. There looks to be a name scratched on the back but i can only make out the letter 'A'

lock restoration

restoring old locks

antique locks

antique locksmith

Posted by Rick the Pick at 1:56 PM GMT
Updated: Monday, 9 November 2015 3:34 PM GMT
Post Comment | Permalink | Share This Post
Sunday, 13 February 2011
Magnetic attacks - Locksmith Blog
Topic: Bypassing

So as of late, the latest must have tool for your locksmith toolbag is the large neodymium magnet.

Marc Tobias has just released an official document regarding the missing C-clip on certain models of the Kaba simplex combination locks. (a good summary can be found here)

Its an attack that has been known about for quite some time but was most commonly conducted via a small hole in the left hand side of the lock case to allow a pulling wire in and pull the plate manually.

With the increasing availability of high powered magnets almost anyone can perform the ultimate NDE bypass on these locks throwing this vulnerability into the spotlight and will undoubtedly cost the makers a considerable sum of money if not cripple them financially.

Locksmiths: Make sure you order the largest magnet you can afford, I tried using a 50x50x25mm magnet which was not sufficient to pull the plate on the larger unican models, but was fine for the smaller 7000 series.

Other locks worth mentioning here would be the Avocet ABS, currently being heavilly marketed throughout the UK which incorporates a magnetic pin of which is easilly overcome using a small magnet (I use a piece of rubbery fridge magnet) inserted into the keyway above the pinstack or using a magnetised pick blade.


magnetic locks

There are many good sites out there to buy high quality magnets. There are two that i will recommend, as are both cheap and ship quickly:

First4Magnets

E-magnetsuk

So, happy experimenting folks and let me know if you discover anything interesting, its a new dimension to lock manipulation and im sure theres plenty of new lock vulnerabilities that remain undiscovered.

ps: Watch your fingers!

Posted by Rick the Pick at 3:48 PM GMT
Updated: Monday, 9 November 2015 3:35 PM GMT
Post Comment | Permalink | Share This Post
Friday, 4 February 2011
Sorry its been a while - Locksmith Blog
Topic: General Chatter

Im sorry its been a long time since i updated the blog iv been incredibly busy both working and optimising my locksmith site to get even more work.

So im routing through my photobucket account to see what iv been upto lately, i forget myself sometimes...

A few weeks ago i had a clearout of all the old locks i had knocking around, i really didnt realise that id saved up so many and have been flogging them on LP101 10 for £12 (free postage),theres still a fair few left if anyone fancies some cheap locks to pick.


I havent done much hobby picking at all lately the last lock i picked was an AZBE cylinder sent to me by Mike at Sheffield Locksmiths, which turned out to be an easy one, i had this lock open in under 60 seconds.

The lock was very sloppy and poorly manufactured making for a very simple pick with little opposition other than the tight keyway of the cylinder.

azbe lock cylinders

Going back even further i managed to pick a DOM (of some description) sent to me by Femurat of LP101. Again not much trouble at all once id worked out where the active side pin was hiding.

dom euro cylinder locks

It might be worth mentioning that iv recently purchased  a load of MT5 padlock corescomplete with reg cards and the plastic retainer which should be a direct replacement for the old classic style padlock. Contact me if you would like one ;-)


Posted by Rick the Pick at 1:31 PM GMT
Updated: Monday, 9 November 2015 3:36 PM GMT
Post Comment | View Comments (1) | Permalink | Share This Post
Wednesday, 17 November 2010
Testing the Cyberlock - Locksmith Blog
Topic: Bypassing

Im sorry it has been a while since i updated my locksmith blog.... My new home and DIY have been keeping me busy.

Anyhow...

I recently met with a UK Videx distributor for a demonstration of the Cyberlock.

Im always wary of new technology and the claims made by their sales representitives, however im happy to report that i was quite impressed with what i was shown.

cyberlocks

Encrypted lock technology is definately the way forward and is on offer by various companies in different forms; Kaba Locks for example should be a serious competitor offering similar management capabilities with their range of access control products.

Basically these systems now allow the real time management of access to doors/locks/whatever.

The cyberlock is the only product i have seen so far that retrofits existing hardware, making it especially appealing.


videx cyberlock

As with all new technology price is an issue and systems can be very pricey, although could be cost effective for large business customers with massive key collections and management issues.

Its certainly a system id be interested in installing and i hope to deal with the supplier in the future.


Posted by Rick the Pick at 12:46 PM GMT
Updated: Monday, 9 November 2015 3:38 PM GMT
Post Comment | Permalink | Share This Post
Tuesday, 21 September 2010
Multipoint locks flaw - Locksmith Blog
Topic: Bypassing

I still find it hard to believe that multipoint lock manufacturers still havent effectively dealt with the hole bypass problem that these locks suffer from.

It seems all that is required to unlock the doors is a small hole and a bent wire to act as the cam. (shown here on a Winkhaus lock case)

winkhaus lock case

It seems all that is required to prevent such an attack is a hardplate escutcheon around the vunerable area.

Most of the new range of euro-deadlock lock cases are now supplied with a hardplate escutcheon for this very reason and locks such as the chubb viper deadlock come with considerable protection to prevent this easy bypass.


Others such as the London Line deadlock have a non manipulatable mechanism that can only be unlocked with a tight fitting cylinder. (in fact my cam turner wont even budge them).


Posted by Rick the Pick at 2:10 PM BST
Updated: Monday, 9 November 2015 3:39 PM GMT
Post Comment | View Comments (1) | Permalink | Share This Post
Tuesday, 14 September 2010
Lock Buying Guide - Locksmith Blog
Topic: General Chatter
A new addition to my locksmith wolverhampton website is the 'Buying a lock guide' aimed at customers looking for information on choosing the best lock for their door at the right price.

Feel free to take a look at the site (currently under construction) and i would be greatful for any feedback or ideas to improve what i hope will become a popular resource.

Posted by Rick the Pick at 12:58 PM BST
Updated: Sunday, 20 January 2013 10:26 AM GMT
Post Comment | Permalink | Share This Post
Friday, 10 September 2010
Random Experiments - Locksmith Blog
Topic: Lock picking

I have always struggled with the picking of the 7 pin Garrison locks so have been experimenting with various new ideas to open them.

Im pretty sure after my last post its fair to say they will be shimmable like the mt5 was.

Secondly was impressioning.
I had a crude attempt at making up an impressioning key that used a plasticine face in which to sink the pins. I made this by sinking each cut to full depth (and a bit more).

I then filled the rest of the key with soft plasticine and carved the profile back in.

impressioning

The main problem would be getting the key in the lock unscathed. My method was to stick the key in the freezer for 10 minutes although in a real situation it would be better to use a gas aerosol or similar.

Anyhow once the key was in the lock i left a few minutes to thaw and began the self impressioning wiggling.

I managed to get the lock to false set on 3 attempts meaning there were pins oversetting. The problem with garrisons is there always seems to be high and low pins situated alongside one another making impressioning tough. (this is why i didnt go for foil)

Although i didn't get a 100% result here it displayed some positive results and with a few modifications i think il be able to get this to work.

and Thirdly the rake key.

Using a Garrison bump key i machined away a mm of the edge of the key so that i could insert a tension wrench in with the bump key. The idea being you can hold light tension while concentrating on the raking as oppose to trying both with one hand movement.

Rake key

Again some success. I managed yet again the false set, however it was then impossible to remove the key to pick the remaning pins by hand. So all in all not much use... just like the bump key 

 Rick | West Midlands locksmiths


Posted by Rick the Pick at 11:57 AM BST
Updated: Monday, 9 November 2015 3:40 PM GMT
Post Comment | Permalink | Share This Post

Newer | Latest | Older